Floral Epoxy Resin for Large Art Castings, Deep Pours and Simulated Water - 2 Part Kit 1.5 Gallon

Crystal Clear Floral Epoxy Resin is Perfect for Large Castings, Thick table pours and gives simulated water appearance for floral decor.

This product is a 3:1 mix. It is 100% polyamine based epoxy system that is designed for high gloss crystal clear casting applications. This epoxy system will cure rigid with a blush free, shiny high gloss finish. This product was specifically developed for large castings - low viscosity (150cps.) bubble free - 0% shrinkage - minimal yellowing - low exotherm.

This resin can also be used for embedding as well as castings where typically micro-bubbles and heat are an issue. Cured specimens will be free of bubbles and have the optically clear appearance.

This epoxy system will cure rigid with a blush free, shiny high gloss finish. This product was specifically developed for large castings - 3" in depth. This has low viscosity (150cps.) and can do what other epoxies can't.

Approved applications:

• Large castings (riverbed pours)
• Jewelry making
• Hobbyist and craft making
• Floral arrangements
• Fake water applications
• Waterproofing & sealing

Advantages:

• Bubble-free
• Slow cure (72 hours @ room temp.)
• Very low yellowing
• Minimal exotherm
• Low viscosity at 150cps (close to water)
• Pot life of 240 minutes (150 grams)
• Acid, chemical, & moisture resistant
• Rigid, blush-free, high gloss finish
• Hardness shore - durometer scale d-88
• Heat resistant to 130c.

• This is not a polyester

• Tensile Strength - 8750

You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.

Mixing Instructions will be included with the kit and can be found online by following this link here.

Not sure which epoxy resin is for you? Follow this link To review our comparison chart.